Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Long Beach Homeowners
A gate that won’t open or close properly does more than block your driveway. It leaves your Long Beach home exposed and your family’s routine on hold. Warden Gate Repair has specialized in gate-only work since 2008, and we answer the phone with a live person around the clock. Our technicians arrive with a written price in hand before any work starts, and every repair carries the 365-Day Done Right Promise. When your swing gate grinds or your slide gate stalls in Long Beach, call (562) 512-6788 and describe what you’re hearing. We’ll tell you what it likely is over the phone and set a time that works.
Driveway Gate Repair
Driveway Gate Repair means getting the gate that protects your property opening, closing, and latching correctly again, whether it’s a single swing arm, a bi-fold panel, or a heavy slide gate on a track. In Long Beach’s salt air, we see hinge corrosion and actuator seal failure more often than in inland cities like Cerritos or Bellflower. We come out, diagnose the exact failure, and hand you a written price before touching a bolt. Most automatic gate repair jobs in Long Beach run between $180 and $475 depending on whether it’s a hinge replacement, a track realignment, or a control board issue.
Hinge and Post Repairs
When a gate sags, the hinge is usually the culprit, and on wooden driveway gates near the water it’s often the post that has begun to rot at the base. We replace hinges with galvanized or stainless hardware and can reset posts in concrete where needed, offering full hinge & post repair when both have failed. We’ll tell you honestly if a hinge rebuild will hold or if the post needs full replacement before we quote anything.
Actuator and Arm Adjustments
A gate that opens halfway and quits usually has an actuator or arm problem. We rebuild or replace actuator arms on LiftMaster and FAAC systems regularly in Long Beach, and we carry common arm components on the truck so most jobs finish in one visit.
Styles & brands we work with
Gate Welding
Gate Welding is the structural repair of metal gates, posts, and frames where bolts or brackets won’t hold, and it’s how we restore the strength of a sagging steel or iron gate rather than replacing it. Long Beach’s coastal moisture accelerates rust where thin factory welds were never properly sealed, particularly in Naples and Belmont Shore neighborhoods. We cut out the failed section, weld new steel in place, and grind it smooth so the repair disappears. Depending on the break, gate welding in Long Beach typically runs $150 to $500, with larger structural repairs quoted after we see the gate in person.
Cracked Frame and Pickets
A cracked weld near a hinge or latch is the leading cause of a gate that suddenly binds. We weld the crack, reinforce the joint with a plate when the metal is thin, and then prime and paint the area to match the existing finish.
Latch and Strike Plate Welds
When the latch won’t catch, a worn strike plate or bent latch arm is often the offender. We realign the latch or weld a new strike plate in position so the gate closes firmly and stays closed against wind and casual pressure, and we can handle lock repair if the mechanism itself has failed.
Commercial Gate Repair
Commercial Gate Repair covers the larger, high-cycle gates used at apartment complexes, parking lots, storage facilities, and business properties in Long Beach. These gates run hundreds of cycles a day, and when they fail, tenants call the property manager immediately. We service commercial operators from LiftMaster, BFT, and Linear, and we understand that downtime on a commercial property in Long Beach means a security gap that has to close fast. Commercial gate repairs typically start around $300 and can exceed $1,000 for operator replacement or loop detector work, always with a written price delivered before the work starts.
Operator and Loop Systems
Commercial operators are designed for heavy use, but loop detectors in asphalt are a common failure point when trucks run over the approaches daily. We troubleshoot both the operator and the loop detector in one visit, so we’re not guessing at which part of the system failed.
Property Manager Coordination
We work directly with property managers and HOAs in Long Beach, providing written quotes they can submit to a board, and we schedule work around tenant access hours where possible. A detailed work order and photo documentation of the repair comes standard on every commercial job.
Iron Gate Repair
Iron Gate Repair involves straightening, welding, and refinishing the ornamental iron gates common on older Long Beach properties in neighborhoods like Bluff Park and Rose Park. These gates are beautiful but heavy, and decades of salt air exposure causes rust inside joints that looks small on the outside. We cut out rusted sections, weld in new iron, and restore the gate’s alignment so it swings freely. Most iron gate repairs in Long Beach fall between $200 and $550 depending on how much rust has spread through the frame.
Rust Treatment and Prevention
Surface rust is treatable with wire brushing, a rust converter, and a quality primer and paint system. We do the full treatment whenever we weld, because welding fresh steel next to untreated rust just means the problem comes back in a year or two.
Scroll Work and Ornamentation
Broken scrolls and decorative ironwork are part of the character of a Long Beach home. We weld fractured ornamental pieces back in place and can fabricate replacement scrollwork to match the existing pattern when a piece is missing entirely.
Sliding Gate Repair
Sliding Gate Repair fixes gates that roll sideways along a track, the standard style for wider driveways and many commercial sites in Long Beach. When a sliding gate grinds, jumps the track, or stops partway, it’s usually a roller, track, or chain tension issue. We inspect the full run of track, replace worn rollers, and adjust chain or belt tension on BFT and Viking slide operators, including gate realignment when the track has shifted. Sliding gate repair in Long Beach typically costs $200 to $600, with track replacement on the higher end when years of stress have warped or corroded the rail.
Roller and Track Alignment
Worn rollers put side load on the track and the motor, which shortens the life of both. We replace rollers before they fail completely and check that the track is level and clear of debris along the entire length of travel.
Chain and Belt Tension
A loose chain causes sloppy starts and stops, while an over-tightened one strains the motor and can snap a drive sprocket. We set tension to the manufacturer’s spec and confirm the gate moves smoothly at both ends of the track.
Wrought Iron Gate Repair
Wrought Iron Gate Repair is the specialized restoration work for classic hand-forged gates, the ones with curved pickets, finials, and decorative hinges you see on older estates and historic homes in Long Beach’s Wrigley and Los Altos areas. True wrought iron is softer than modern steel and requires a different welding approach. We weld using methods appropriate for the material, and we match the original aesthetic rather than slapping on a modern bracket. Wrought iron repair in Long Beach runs $250 to $800 depending on the complexity of the break and the finishing work required.
Replacement Pickets and Rails
Original wrought iron pickets are often missing or too thin to reweld after years of corrosion. We fabricate replacement pickets in matching sizes and patterns, and we can source reclaimed iron where a closer match is needed.
Historical Detail Matching
We understand that a Long Beach home with original ironwork shouldn’t get a generic repair that stands out. Our welders match the twist, the spacing, and the surface texture so the repaired section blends with the original.
Metal Gate Repair
Metal Gate Repair is the broad category covering hollow steel, aluminum, and mixed-material gates found on most mid-century and newer Long Beach homes. These gates are usually lighter than iron but still develop hinge slop, latch misalignment, and damage from being backed into. We straighten bent frames, replace worn hinge barrels, and bring the gate back to plumb. Typical metal gate repair pricing in Long Beach is $150 to $450, depending on whether we’re adjusting hardware or straightening a bent frame member.
Bent Frame Straightening
A car bump or a strong gust can bow a lightweight aluminum frame out of square. We use a combination of heat and clamping to pull the frame back into line, then check the gate hangs true before we leave.
Hardware and Latch Upgrades
Many factory latches on metal gates are built to a price, not a lifespan. We replace failed latches with heavier hardware and match the hole pattern where possible so the upgrade looks original.
Wood Gate Repair
Wood Gate Repair covers the cedar, redwood, and pressure-treated gates that are common throughout Long Beach’s residential neighborhoods. Wood gates fail in two places consistently: the post, which wicks moisture from the soil, and the diagonal brace, which loses its hold as the wood dries and shrinks. We replace rotted posts, rebuild saging panels, and refinish surfaces to slow the next round of decay. Wood gate repair in Long Beach generally runs $180 to $520, with post replacement typically on the upper end.
Post Replacement and Setting
A gate that drags on the ground is almost always a post problem. We dig out the rotted post, set a new pressure-treated post in concrete below the frost line, and rehang the gate so it clears the ground with room to settle.
Brace and Panel Rebuilding
When the diagonal brace pulls loose, the gate rectangle becomes a parallelogram and the latch stops aligning. We rebuild the panel with proper compression bracing and replace any boards that have split beyond salvage.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We service and repair gates and operators from LiftMaster, FAAC, BFT, and Linear, along with the rest of the nine major brands we support. LiftMaster is the most common operator we see in Long Beach residential installs, and we stock OEM gear assemblies and control boards for the current and previous generation models. FAAC hydraulic operators appear frequently on larger estate gates in the area, and our team is trained on their swing and slide operators so we can diagnose a pressure issue without trial and error.
BFT and Linear operators are common on commercial properties and multi-family gates in Long Beach, and we carry the loop detector and receiver parts those systems rely on. Whether you have one of those, a Viking, a Ghost Controls, a DoorKing, an Elite, or a Mighty Mule system, or any other make, we can help with your gate repair needs and tell you over the phone which parts we might need to bring.
Signs You Need a Pro Right Now
- Gate reverses direction unexpectedly. A safety sensor or force setting issue may be at play. Operating a gate that reverses mid-cycle into a car or a child is a serious risk, and the underlying fault usually gets worse, not better, when ignored.
- Loud grinding or squealing from the operator. Grinding means a gear, bearing, or pump is failing under load. What starts as noise often becomes a seized operator within weeks, and the repair cost climbs when the motor burns out.
- Gate sags and drags on the ground. A dragging gate puts constant strain on the hinge or the wheel carriage. The more it drags, the more it wears, and eventually the gate binds completely and won’t move at all.
- Remote or keypad works intermittently. Intermittent operation points to a failing receiver, a failing board, or a wiring fault. A gate that opens for a random stranger’s remote or doesn’t open for you at all is a security gap you shouldn’t leave open.
- You see rust or cracks near any weld. Coastal moisture in Long Beach works fast on exposed steel. A small crack or rust blister near a hinge or latch is a stress point that will fail, and we’d rather weld it now than replace a broken gate later.
Our Process, Step by Step
- 1
You call, a person answers. Live phone coverage runs 24/7, including nights and weekends. We listen to the symptom, ask a few pointed questions about the gate’s movement and sounds, and schedule a visit that fits your day in Long Beach.
- 2
You get a name and a photo before we arrive. Every Warden technician passes a background check and identity verification, and the Threshold Standard means we send you the tech’s name and photo before they pull into your driveway. At the door, they’ll show a photo ID badge.
- 3
Diagnosis with no guesswork. The tech tests voltages, continuity, and mechanical play, and runs the gate through a full cycle to see what it’s actually doing. We don’t quote a control board when the limit switch is the obvious fault.
- 4
Written price before work starts. You get a written quote with the repair scope and cost itemized clearly. The price is agreed before any wrench turns, and that number doesn’t change at the end of the job.
- 5
Repair completed and guaranteed. We test the full open-close cycle, verify the safety edges and stops are working, and leave the work area clean. Your repair carries the 365-Day Done Right Promise: if the same fault returns within a year, the second visit is free.
How Much Does Gate Repair Cost in Long Beach?
A typical gate repair in Long Beach runs $180 to $600 for the majority of residential jobs, including hinge replacements, track realignments, weld repairs, and actuator adjustments. A straightforward latch or hinge fix lands near the bottom, while a full operator replacement or significant structural welding can reach $1,000 or more on commercial gates. Wood gate repairs tend to range $180 to $520, iron and wrought iron work runs $200 to $800, and sliding gate track or roller work falls between $200 and $600.
What moves the price most is parts: a universal receiver costs less than an OEM control board, and a rebuilt hinge costs less than a newly fabricated wrought-iron picket. Salt-related corrosion in Long Beach also affects cost because we treat and seal the repair rather than leaving bare metal to rust again. The best way to avoid overpaying is to get a written quote before approval, and to ask whether the part going in is new OEM or a qualified aftermarket piece. Our estimates are free and always include the full scope, so call (562) 512-6788 and we’ll walk through what your specific gate likely needs.
Our Service Area Near Long Beach
Warden Gate Repair Long Beach serves the city and the surrounding communities including Huntington Beach, Garden Grove, Downey, Westminster, Buena Park, Lakewood, Cerritos, Norwalk, and Bellflower. Most calls within Long Beach see same-day or next-day visits, with nearby cities scheduled on a short rotating route. When you call, we’ll give you a realistic arrival window, not an all-day vague range.
Serving Long Beach, CA - Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Long Beach
Gate repair is the process of diagnosing and fixing the mechanical, structural, or electrical problems that keep a gate from opening, closing, latching, or securing properly. It spans everything from replacing a worn hinge to repairing a welded joint to diagnosing a dead operator control board. A proper gate repair leaves the gate functioning safely and reliably, with safety sensors and force settings verified.
Most residential gate repairs in Long Beach are completed in 1 to 3 hours on site. Jobs that require digging out and re-setting a gate post, or welding structural sections, can take half a day. When we schedule the visit, we’ll give you a realistic time window based on the symptoms you describe.
Most residential gate repairs in Long Beach fall between $180 and $600, with the final price set by parts and the nature of the failure. Commercial gate repairs and full operator replacements can exceed $1,000. Every job gets a written price before any work starts, so you know the number before you approve anything. Call (562) 512-6788 for a free estimate based on your specific gate.
Yes, we service LiftMaster gate operators regularly and stock OEM parts for current and previous generation models. Alongside LiftMaster, we service FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your operator is outside that list we’re glad to take a look and tell you honestly whether it’s a repair we can do.
In most cases we can get a technician to a Long Beach address the same day, especially for safety-related failures like a gate that will not close or an operator that runs on its own. Our phone lines are live 24/7, so you’ll speak with a person who can tell you what’s available, not a recording that asks you to leave a message.
Every repair carries the 365-Day Done Right Promise in writing. If the repair fails for the same reason within a year, the return visit to make it right is free. The promise covers workmanship and parts we supply, and you’ll see the terms in writing on your quote.
Clear the area around the gate so the technician can access both sides of the hinge and the operator, and gather remotes or keypads if the problem involves opening or closing. If your gate is at a rental or HOA property, let the property manager know the visit time. There’s nothing else you need to do; we bring the tools, parts, and safety gear we need.
Schedule Your Gate Repair Service in Long Beach Today
When your gate isn’t working, the fix starts with a phone call. Reach us at (562) 512-6788 any hour, any day, and you’ll speak with a person who can get you scheduled and give you a free, no-obligation estimate. You’ll know the technician’s name and face before they arrive, and you’ll know the exact price before any work begins.
Written by Cole Rafferty, Owner at Warden Gate Repair Long Beach, serving Long Beach since 2008.