Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with





See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Long Beach?
Gate installation in Long Beach typically costs between $1,850 and $7,400 for a complete project in 2026, with most homeowners spending around $3,200 to $4,800 for a standard driveway gate with an automatic opener. The final price depends on the gate material, whether you need a sliding or swing configuration, and whether your property requires new posts, electrical rough-in, or intercom wiring.
We’ll walk you through exactly what those numbers cover, what drives the price up or down in Long Beach specifically, and when a repair makes more sense than a replacement. If you want a written quote for your specific property, call us at (562) 512-6788 and we’ll send a technician with a name, a photo, and a fixed price before any work starts.
Key Takeaways
- Most Long Beach gate installations run $1,850 to $7,400, with the typical project landing around $3,200 to $4,800.
- Wrought iron and steel gates cost more than aluminum or vinyl, but they hold up better against the salt air near Belmont Shore and Naples Island.
- Automatic openers add $900 to $2,800 on average, depending on whether you choose a swing arm, slide operator, or underground loop system.
- Permits in Long Beach add roughly $150 to $400, and your installation may need to meet specific setback and height requirements under the city’s zoning code.
- Warden Gate Repair Long Beach sends every quote in writing before work begins, and every installation is covered by our 365-Day Done Right Promise.
Gate Installation Cost Breakdown (2026)
Here’s how a typical Long Beach gate installation project breaks down line by line. These ranges reflect what we’ve seen across the city in 2025 and 2026, from Bixby Knolls to the Peninsula:
| Line Item | Typical Cost Range (Long Beach, 2026) |
|---|---|
| Single aluminum pedestrian gate (manual) | $650 – $1,400 |
| Single steel or wrought iron gate (manual) | $1,200 – $2,600 |
| Double driveway gate, manual (aluminum) | $1,800 – $3,200 |
| Double driveway gate, manual (steel or iron) | $2,800 – $4,800 |
| Automatic opener, swing arm | $900 – $1,800 |
| Automatic opener, slide operator | $1,400 – $2,800 |
| Underground loop detector (opens gate when car approaches) | $500 – $1,100 |
| Gate posts, set in concrete | $300 – $700 per post |
| Electrical rough-in and outlet near gate | $450 – $1,000 |
| Intercom or keypad entry system | $350 – $900 |
| Removal and disposal of old gate | $200 – $500 |
These prices assume a reasonably level driveway or walkway. Long Beach has a lot of older homes where the gate footing has shifted, and in those cases you may need concrete work before the gate itself goes in. That’s not a hidden fee, it’s just what happens when a 1940s bungalow in California Heights gets a modern gate system.
On the higher end are properties along the water (Naples, Belmont Shore, the Peninsula) where salt exposure means we recommend marine-grade aluminum or powder-coated steel. Those materials run 10% to 25% more than standard finishes, but they’ll outlast a budget gate by years in that environment.
New Gate vs. Repair: The Break-Even Point
If your existing gate has a structural problem (sagging, rusted-through frame, broken hinges) and it’s more than 10 to 12 years old, replacement usually costs less than repeated repairs. A typical iron gate repair in Long Beach runs $250 to $700, and if you’re looking at three or four of those in the next few years, you’re close to the price of a new gate. That’s the point where we’ll tell you straight: put the money toward something that lasts.
Our Gate Installation in Long Beach page covers the full process from measurement to final walkthrough if you want to see how the job actually works.
What Affects Gate Installation Pricing in Long Beach
- Gate material and finish. Powder-coated aluminum starts at the low end of the range. Wrought iron and steel cost more but are the standard choice for Long Beach’s Spanish-style and Craftsman homes, where a vinyl gate would look out of place. A custom finish adds $300 to $800.
- Swing vs. sliding configuration. Swing gates are cheaper to install because the opener mechanism is simpler. Sliding gates cost more, but they’re often the only option on Long Beach properties where the driveway slopes toward the house or where space is tight, common in the older neighborhoods around Cambodia Town and Central Long Beach.
- Driveway width and gate size. A standard single-car driveway gate runs 10 to 12 feet wide. At 14 feet or wider, the gate needs heavier framing and a stronger opener, which pushes the project into the upper range. Wide lots in Los Altos and Park Estates often fall here.
- Salt air and weather exposure. Houses within half a mile of the water deal with salt corrosion. We recommend marine-grade powder coating for those gates, and that adds 10% to 25%. It’s not an upsell; we’ve seen standard steel gates start rusting within three years in Belmont Shore.
- Permit requirements and code compliance. The City of Long Beach requires permits for gate installations that exceed certain heights or that sit in a required front-yard setback. Permit fees are typically $150 to $400, and your project may need to meet specific height limits, especially in historic districts like Bluff Park.
- Existing electrical and site conditions. If there’s already a dedicated circuit near the gate, you save $450 to $1,000 on electrical rough-in. No power? We’ll run conduit from your panel, and that adds time and materials. Older Long Beach homes with outdated panels sometimes need a circuit added, which is $200 to $600 on top.
Automatic Gate Opener Costs in Long Beach
Most Long Beach homeowners don’t just want a gate; they want an automatic gate. The opener, or gate motor (the box that slides or swings your gate automatically), is its own cost category.
- Swing arm openers run $900 to $1,800 for the unit and installation. These are the most common for residential driveway gates in Long Beach.
- Slide operators are $1,400 to $2,800. The opener itself is more expensive, and the track and hardware add up.
- Underground systems start at $2,500 and go up from there. We rarely recommend them for residential properties in Long Beach unless there’s a specific reason (like a gate that’s visible from the street in a historic district and the homeowner wants zero visible hardware).
- Solar-powered openers add $400 to $800, and they work well in Long Beach’s climate, but we’ll tell you honestly: if you have electrical near the gate, hardwired is more reliable long-term.
We service and install openers from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That’s the entire lineup we work with, and it means the right parts and the right training are in the truck on day one, not after two follow-up visits.
Permits and Local Codes for Gate Installation in Long Beach
Long Beach has specific rules about gate placement and height that affect both the cost and the design of your project. Here’s what you should know before you plan anything:
- Front-yard gate heights in most Long Beach residential zones are capped at 42 inches when the gate sits within the required front setback. Higher gates typically require a variance or must be set back farther from the street.
- Gates in side or rear yards don’t face the same height restrictions, but they still need to meet the city’s building code for structural support.
- Electric gates must have a pedestrian access gate or a pressure-sensor reversal system to comply with current safety standards. This is non-negotiable, and we won’t install a gate without it.
- If your home is in a designated historic district (Bluff Park, Rose Park, parts of Downtown), the Cultural Heritage Commission may need to review the gate design before a permit is issued.
Yes, this all sounds like red tape. But it’s the difference between an installation that’s legal and insurable and one that creates a problem when you sell the house. We handle the permit paperwork as part of the installation, and our quotes include permit fees so there’s no surprise line item at the end.
How Long Does Gate Installation Take in Long Beach?
A straightforward single gate with an automatic opener takes one to two days from post-setting to final testing. A double driveway gate with new electrical and an intercom system can take two to three days, depending on how much site work is included. Custom fabricated gates add one to three weeks for manufacturing after measurements are taken.
Long Beach weather rarely causes delays, which is one advantage of this climate. We work year-round, and unless there’s a major storm, your install won’t get pushed.
How to Save on Gate Installation
Here’s what actually saves money, based on what we see across Long Beach:
- Buy a gate package that matches a standard size. Custom widths and heights add 20% to 40%. If your opening works with a standard 10-foot or 12-foot gate, you’ll pay significantly less.
- Use your existing posts when they’re still solid. If the posts are level and set in good concrete, we can often reuse them and save $300 to $700.
- Choose an aluminum gate with a powder-coated finish. It’s lighter, cheaper than wrought iron, and holds up well in Long Beach’s coastal air if you’re not directly on the sand.
- Stage the project. Install the gate now and add an automatic opener later. A manual gate still provides security, and you’ll spread the cost over time. Just make sure the gate is built to accept an opener when you go that route.
- Get a written estimate first. This is the one that matters most. A free estimate from Warden Gate Repair Long Beach means you know the exact number before you commit. Call (562) 512-6788 and we’ll give you a price that doesn’t change at the end.
For a broader look at what gates cost to maintain and operate, you can always start at our home page and explore the full range of services we offer.
Gate Installation Cost by Material: What Works in Long Beach
Choosing the right material for a Long Beach gate isn’t just about appearance. The climate here (mild winters, salt air near the coast, occasional extreme heat inland) means some materials perform better than others.
Wrought Iron and Steel
Wrought iron gates run $2,200 to $7,000+ installed. They’re the strongest and most traditional option, and they match the character of Long Beach’s historic neighborhoods. The downside: they need powder coating and regular maintenance, especially within a mile of the ocean where salt accelerates rust. Re-coating every five to seven years typically runs $400 to $900.
Aluminum
Aluminum gates cost $1,500 to $4,500 installed. They’re lighter, don’t rust, and are the best value for coastal properties. The trade-off is strength: aluminum dents more easily than steel, and a hard hit from a car will do real damage. For most residential driveways, though, aluminum is the sweet spot.
Vinyl and Composite
Vinyl gates run $1,200 to $3,000. They never need painting and hold up fine in Long Beach’s weather. They’re not a great match aesthetically for older Spanish or Craftsman homes, and they can look out of place in areas like Bluff Park or Carroll Park where character matters. But for a modern home in East Long Beach, they’re a solid budget choice.
Wood
Wood gates cost $900 to $2,500 installed. They’re the cheapest up front, but Long Beach’s combination of sun and humidity (especially in summer months) warps wood faster than most people expect. We generally steer Long Beach homeowners away from wood unless the privacy factor is essential and they’re committed to refinishing every two years.
Gated Entry Systems and Intercom Costs
Many Long Beach homeowners add an entry system to their gate, and it’s worth budgeting for if you’re already doing the installation:
- Keypad entry: $350 to $700 installed. Simple, reliable, and the most common request we get.
- Intercom with video: $700 to $1,800 installed. These systems have come down in price, and they’re a popular upgrade for homeowners who want to see who’s at the gate before opening it.
- Smartphone app control: $300 to $600 on top of the opener. Works with most LiftMaster, Ghost Controls, and Mighty Mule openers.
- License plate camera systems: $1,500+ installed. This is commercial-grade, and we do install them for Long Beach homeowners with long driveways or multiple vehicles.
Here’s something most companies won’t tell you: the $350 keypad does everything most homeowners actually need. If you want to see who’s at the gate, go with the video intercom. Beyond that, you’re paying for features you’ll rarely use.
Step-by-Step: How Warden Gate Repair Installs a Gate in Long Beach
Here’s exactly how the process works, so you know what to expect from the first call to the final walkthrough:
- Call and set up an estimate. Call (562) 512-6788 and talk to a live person, 24/7. We’ll schedule a time that works for you.
- Meet your technician. Before the visit, we send the technician’s name and photo. At the door, they’ll show a photo ID badge. That’s the Threshold Standard on every single visit.
- Get a written estimate. We measure the opening, discuss materials and opener options, and hand you a written price. No wait-for-the-manager, no “it depends.” What’s on the paper is what you pay.
- Site prep and post-setting. We dig and set the gate posts in concrete, following the manufacturer’s specifications for depth and load. If electrical is needed, we run the conduit and outlet at this stage.
- Gate installation and opener mounting. The gate goes on its hinges, the opener is mounted and calibrated, and safety sensors (including the required reversal mechanism) are installed and tested.
- Programming and final testing. We program remotes, keypads, and any intercom or app controls, then run through a full checklist of safety tests and open/close cycles.
- Final walkthrough and your written guarantee. We show you how everything works, answer every question, and hand you the written guarantee, including your 365-Day Done Right Promise: if the repair or installation isn’t right, we make it right, with a free second visit included.
FAQs – Gate Installation Cost
How much does a driveway gate cost in Long Beach?
A driveway gate in Long Beach typically costs $2,800 to $6,500 installed with an automatic opener in 2026, with most residential projects falling between $3,200 and $4,800 for a double gate. A manual driveway gate runs $1,800 to $4,800 depending on material and width. Call (562) 512-6788 for a written estimate specific to your property, free of charge.
Is it cheaper to repair a gate or replace it?
If the repair costs less than 40% of a new gate’s price and the gate is structurally sound, repair is usually the smarter move. A typical Long Beach gate repair runs $250 to $700, while a new gate starts around $1,500. But if your gate is rusted through at the joints, sagging badly, or more than 12 years old, replacement is almost always cheaper over the next five years.
How much does an automatic gate opener cost?
An automatic gate opener costs $900 to $2,800 installed in Long Beach, depending on whether it’s a swing arm or slide operator. Keypads add $350 to $700, and smartphone app control adds $300 to $600. We work with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers.
Do I need a permit for a gate in Long Beach?
Yes, in most cases. Long Beach requires a building permit for gate installations that exceed 42 inches in height within the front setback or that involve electrical work. Permit fees run $150 to $400, and we handle the paperwork as part of the installation. Call us at (562) 512-6788 and we’ll tell you exactly what your project requires.
Can you install a gate the same week?
For standard gates that don’t require custom fabrication, yes, we can usually schedule installation within five to seven business days in Long Beach. Custom gates take longer because of manufacturing lead time, typically one to three weeks after measurement. Call (562) 512-6788 and we’ll give you a real timeline during the estimate.
Why Long Beach Homeowners Choose Warden Gate Repair
We know a gate installer isn’t like a plumber. You’re not just letting someone onto your property; you’re letting them interact with the thing that keeps everyone else away from it. That’s a different level of trust.
Our founder, Cole Rafferty, started Warden Gate Repair in 2008 as part of the Threshold Group family because he saw how many gate companies treated security as an afterthought. The name isn’t an accident. A warden is trusted to watch over a place and keep it secure. That’s the whole idea behind a gate, and it’s the standard we hold ourselves to.
Here’s what that means in practice:
- You always know who’s coming. Every technician is background-checked, identity-verified, photo-badged, and sent to you by name and photo before arrival. The Threshold Standard is enforced on every visit, no exceptions.
- You always know the price. The written price is given before any work starts, every time. No surprise line items at the end, no vague “we’ll see once we get in there.”
- You’re covered for a full year. The 365-Day Done Right Promise means if your installation or repair isn’t right, we make it right. Your second visit is free, every time, with every job.
- There’s always a human on the phone. Live-person phone coverage 24 hours a day, 7 days a week, 365 days a year. No voicemail, no chatbot.
Long Beach has plenty of gate companies. What it doesn’t have is many that hand you a name, a photo, and a written price before the work starts. We do that on every job, and we’ve done it that way since 2008.
Get a Written Estimate for Your Long Beach Gate Installation
The fastest way to know what your gate installation will cost is to call us. You’ll talk to a live person, we’ll schedule an estimate at a time that works for you, and you’ll get a written price from a technician whose name and photo you’ll see before they arrive.
Call (562) 512-6788 for a free estimate. No pressure, no vague numbers, no surprises. Just a straight price from someone who does gates and nothing else.
Written by Cole Rafferty, Owner at Warden Gate Repair Long Beach, serving Long Beach since 2008.
Pricing reflects the Long Beach market as of 2026. Warden Gate Repair Long Beach offers free estimates – call (562) 512-6788.
What Our Customers Say
"Rusty chain drive got cleaned, lubed, and re-tensioned. He told me what to do each year to keep it going."
- Leon M."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Properly aligned the photo eyes and tested the auto reverse. Left a note of what he changed."
- Isaac N.