Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateLinear Electric Gate Repair in Long Beach: What to Know First
Linear electric gate repair in Long Beach comes down to diagnosing the operator, the board, or the sensor, then fixing the right one the first time. Most Linear jobs we see are operator motors that stopped responding or control boards with burned relays. We’re an independent Linear service provider, which means we repair Linear equipment but aren’t owned by or authorized by the manufacturer. Typical Linear repairs in Long Beach run $180 to $480, and we write the price down before any work begins. If your Linear gate is acting up, call (562) 512-6788 and tell us exactly what it’s doing or not doing.
This page is for Long Beach homeowners and property managers with Linear operators, gate motors, remotes, keypads, and safety sensors. You’ll find the failure patterns we see most often, what they cost, and how we work. If you already know the symptoms and just want a straight answer, call us.
How Linear Products Fail and How We Fix Them
- Linear LSO50 and LDO50 operators: capacitor failure on older units. These swing gate operators, common around Bixby Knolls and Los Altos, use a starting capacitor that degrades over time. The gate hums but won’t move, or moves partway and stops. We replace the capacitor with an OEM-spec part, check the motor windings while we’re there, and test the open-and-close limit settings. A capacitor replacement usually fixes it for another five to eight years.
- Linear APeX series boards: relay burnout from gate weight. The APeX line shows up a lot on Long Beach homes with heavier steel gates. When the gate is over the operator’s rated weight, the control board relay carries too much current and fails. Symptom: the remote clicks, the board clicks, nothing moves. We replace the relay or the board and set the force sensitivity to match the actual gate weight, which keeps the next board alive longer.
- Linear MCT-3 and MCT-11 transmitters: dead buttons from moisture. These remote controls are common on Long Beach properties near the coast where salt air gets into the button contacts. The remote lights up but won’t trigger the gate. We clean or replace the internal button pad, reprogram the transmitter, and verify the receiver frequency. If the remote is too far gone, we replace it with a Linear-compatible transmitter and set all codes on site.
- Linear photo eye sensors (MGT model sensors): sun fault false triggers. The safety sensors on sliding gates along east-west driveways catch direct afternoon sun. The beam gets washed out and the gate refuses to close. We reposition the sensor heads, add hoods, or rewire them to a more reliable input on the board. The gate closes consistently after that.
- Linear keypads (AK-11 and AK-21): corroded keypad terminals from coastal moisture. Outdoor front-gate keypads in Long Beach take direct ocean air. The terminals behind the keypad corrode, the keypad stops accepting codes, and the gate stays shut or behaves erratically. We replace the keypad, seal the new one against moisture, and reprogram all entry codes while the homeowner watches. You get a working keypad and a list of current codes.
Styles & brands we work with





Our Linear Electric Gate Repair Process
Here’s exactly how a Linear repair works when you call Warden Gate Repair Long Beach:
- 1
You call (562) 512-6788. A live person answers, day or night. You describe what the gate is doing, or not doing. That detail matters.
- 2
We schedule a visit and send you the technician’s name and photo before they arrive. Every Warden tech is background-checked, identity-verified, and photo-badged. At the door, they’ll show a photo ID badge before stepping onto your property. That’s the Threshold Standard.
- 3
The tech diagnoses the Linear equipment on site. We check the operator, the board, the sensors, the wiring, and the remote or keypad. We look for series-specific problems, not just generic power issues.
- 4
You get a written price before any work starts. The quote is itemized, in writing, and the final invoice matches the quote. No surprise line items, ever.
- 5
We repair the gate using OEM-spec parts or verified aftermarket parts when the OEM part is discontinued. We never install a part that shortens the life of a Linear unit to save a dollar.
- 6
We test the full cycle, then walk you through it. You see the gate open and close several times, with the safety sensors checked. Every repair is covered by our 365-Day Done Right Promise. If it fails within a year, we come back free.
See the difference
Before
After
Before
After
Before
AfterWhat Linear Electric Gate Repair Costs in Long Beach
Linear repairs in Long Beach land in predictable ranges, and you’ll know your exact price before we touch a tool:
- Capacitor replacement (LSO50/LDO50): $120 to $220 including the part
- Control board relay replacement: $180 to $320 depending on the board and relay
- Control board replacement (APeX series): $340 to $520 including programming
- Remote transmitter replacement or reprogramming: $75 to $160 including the transmitter
- Photo eye sensor repair or replacement: $150 to $280
- Keypad replacement (AK-11/AK-21) with reprogramming: $160 to $300
What moves the price: age of the unit, whether the part is still manufactured, and how much wire corrosion we find. We’ll tell you if a repair is worth it or if you’d be better putting that money toward a new operator. Estimates are free. Call (562) 512-6788 with your model number and we’ll give you a real range before we come out.
Why Long Beach Homeowners Call Warden Gate Repair Long Beach for Linear Work
We’re a gate repair company first and only. We don’t do handyman work, we don’t do plumbing, we don’t get distracted. We fix gates. Warden Gate Repair began in 2008 as part of the Threshold Group family, and our Long Beach location has spent years working Linear operators in neighborhoods from Naples to North Long Beach. Cole Rafferty, our owner and lead technician, grew up in Los Angeles and has been working gates for over two decades. He can tell a capacitor problem from a board problem before opening the housing, and he still writes every quote by hand before typing it up.
We service eight other major brands alongside Linear: LiftMaster, FAAC, BFT, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because many Long Beach properties have mixed equipment, a Linear gate on one entry and a LiftMaster on another. One call covers both. We answer the phone 24/7, and every repair carries the 365-Day Done Right Promise in writing.
A warden watches over a place and keeps it secure. That’s the idea. Your gate is the first line between your home and the street. We treat it that way.
FAQs
We repair Linear equipment, but as an independent service provider we do not process Linear manufacturer warranty claims. If your operator is still under the manufacturer’s warranty, we can diagnose the issue and tell you what the warranty should cover, then you’ll deal with Linear directly for the part. If parts aren’t covered or the labor isn’t included, our repair quote is still the fastest way to get the gate working again. Call (562) 512-6788 and we’ll sort out the details with you honestly.
Most Linear parts for the LSO50, LDO50, APeX, and MCT lines are still available through our parts network. Some discontinued boards and capacitor specs are harder to source, and in those cases we use verified aftermarket parts that match the OEM specification. We’ll tell you which we’re installing and why, then back it with the 365-Day Done Right Promise. Get a free parts check by calling (562) 512-6788.
Yes, many Linear repairs in Long Beach are completed same day once the technician is on site. Common fixes like capacitor swaps, remote programming, and sensor adjustments usually take under two hours. If we need a specific Linear part that isn’t on the truck, we tell you exactly when it will be in and schedule the return visit. Call (562) 512-6788 in the morning and we’ll often have your Linear gate moving again before dinner.
If your Linear operator is under 10 years old and the failure is a capacitor, a board relay, or a sensor, repair usually makes sense. If the unit is over 15 years old, has visible corrosion, or needs a motor replacement, we’ll show you the math on repair versus replacement. We never recommend a new operator just to sell one, and we’ll put the numbers in writing either way. Call (562) 512-6788 for a straight read on your specific Linear model.
Check the power to the operator and the position of the manual release, then note what the gate does when you press the remote or keypad. Does it hum, click, move partway, or do nothing at all? That exact description helps our tech arrive with the right parts. As Cole Rafferty says, “Tell me exactly what the gate is doing, or not doing, and I’ll tell you exactly what it needs.” Then call (562) 512-6788 and tell us what you found.
Written by Cole Rafferty, Owner & Lead Technician, Warden Gate Repair Long Beach at Warden Gate Repair Long Beach, serving Long Beach and nearby areas.