Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Motor & Opener Cost in Long Beach?
Gate motor and opener replacement in Long Beach typically costs $850 to $2,400 for the motor unit plus installation, depending on whether you have a sliding or swing gate. Basic residential swing gate openers start around $650 installed, while heavy-duty sliding gate motors for driveway gates run $1,200 to $3,500 when you factor in Long Beach’s coastal corrosion considerations. Repair work is less: most gate motor repairs in Long Beach land between $185 and $425, with circuit board replacement being the most common fix we see in neighborhoods like Naples, Bixby Knolls, and Belmont Shore.
We’ll explain exactly what drives those numbers below, including why Long Beach’s salt air makes motor choice different here than in, say, inland Orange County.
Key Takeaways
- Full gate motor replacement: $850 to $2,400 typical; sliding gate systems skew higher.
- Repairs: $185 to $425 for most jobs, same-day available.
- Long Beach coastal corrosion can shorten motor life by 2 to 4 years on unprotected units.
- Written price before work starts, every time, no exceptions.
- Free estimates: call (562) 512-6788.
Gate Motor & Opener Cost Breakdown (2026)
Here’s what you can expect to pay in the Long Beach market right now. These ranges reflect what we see on the ground across the city: from the older wrought-iron driveway gates in Los Altos and Park Estates to the aluminum track gates common in East Long Beach and El Dorado Park.
| Service | Typical Price Range (Long Beach) | Notes |
|---|---|---|
| Residential swing gate motor replacement (single gate) | $650 – $1,400 | Includes new motor, mounting, limit setup, and testing. LiftMaster LA400 or Mighty Mule MM371W are common picks. |
| Residential swing gate motor replacement (dual gate) | $1,400 – $2,600 | Two motors, synchronized control board, wireless edge sensors. Common in Lakewood Village and Virginia Country Club. |
| Sliding gate motor replacement (residential) | $1,200 – $2,400 | Heavier-duty motor, rack and pinion gear. BFT Deimos and Viking X-9 are workhorses for Long Beach driveways. |
| Sliding gate operator replacement (commercial/multi-unit) | $2,200 – $3,800+ | HySecurity or DoorKing units. For apartment gates in Alamitos Beach or parking garages downtown. |
| Control board / circuit board replacement | $250 – $550 | The most common repair we do. Salt air corrosion on board connections is a recurring issue in coastal Long Beach. |
| Remote control replacement or programming | $75 – $180 | Includes one or two remotes, programming, and clearing old codes. |
| Photo eye / safety sensor replacement | $150 – $300 | Required for code compliance. Most Long Beach homes need these before selling. |
| Gate opener service call (diagnostic) | $85 – $125 | Fee waived when you proceed with the repair. We tell you the cost before we even come out. |
| Install new gate motor from scratch (no existing opener) | $900 – $2,800 | Includes wiring, conduit, new motor, two remotes, keypad, and programming. |
| Full gate operator retrofits (motor + receiver + safety equipment) | $1,500 – $3,500 | For gates over 12 years old where the entire system is aging out. |
These are what we actually quote, not national averages pulled from a database. A gate motor in Long Beach is not the same as a gate motor in Phoenix. The salt air off Alamitos Bay and the San Pedro Bay means we lean toward marine-rated components and sealed connections. That adds about 10 to 15 percent to parts cost but saves you from replacing a corroded board every two years.
What Drives Cost Up or Down
The single biggest cost variable is gate type. A swing gate motor costs less than a sliding gate motor because a swing opener moves a lighter load with less torque. Sliding gates, especially heavy steel or wood ones, need a motor with enough torque to push several hundred pounds along a steel track. That means a bigger gearbox, bigger motor, and bigger price.
The second variable is motor brand and quality. A basic Mighty Mule opener runs around $350 for the unit alone. A BFT or Viking unit might run $600 to $900. The difference is duty cycle (how many cycles per day it’s rated for) and corrosion resistance. For a single-family home in Long Beach, a mid-range unit is usually the right call. For a 10-unit condo building on Ocean Boulevard, you want commercial-grade.
Third is existing equipment condition. If the receiving board, safety sensors, and wiring are all from the original 2005 install, you’re not just swapping a motor. You’re rebuilding the system. That’s when a $700 job becomes a $1,800 job, and it’s also when repair-versus-replace math gets important.
What Affects Gate Motor & Opener Pricing in Long Beach
- Coastal salt corrosion. This is the Long Beach factor. Homes within two miles of the water (Naples, Belmont Shore, the Peninsula, Bluff Park) get noticeably more corrosion on circuit boards, limit switches, and wiring harnesses. We use dielectric grease on connections and marine-rated enclosures on every coastal job, which adds a little to material cost but extends motor life by years.
- Gate weight and size. A 16-foot wrought-iron driveway gate in Park Estates weighs several times more than a 6-foot walkway gate. Motor torque requirements scale with weight, and so does price. We always measure the gate and calculate weight before quoting.
- Sliding vs. swing configuration. Sliding gate operators cost more because the motor has to drive a gear along a rack. Swing gate openers use an articulating arm, which is mechanically simpler. If you have a sliding gate, budget about $400 to $700 more for comparable quality.
- Access and trenching. If your gate lacks existing power or low-voltage wiring, we need to open a trench and run conduit. In Long Beach’s older neighborhoods (parts of California Heights, Rose Park, and Willmore City date to the 1910s and 1920s), the soil is often compacted and the panels are old, so trenching or wiring work takes longer. Plan on $300 to $800 for new power runs depending on distance.
- Safety equipment retrofits. California building codes require photo eye sensors and edge sensors on automatic gates. If your current gate lacks these or they’ve failed, we add them during a motor replacement. That’s typically $150 to $400 in added parts and labor.
- Condominium and HOA requirements. Long Beach has a large number of gated condo and townhome communities, particularly in East Long Beach and near the Traffic Circle. Many HOAs require a specific brand for compatibility (DoorKing and FAAC are common), which affects your parts cost. We service all nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Repair vs. Replace: How to Decide
Here’s the honest math. If your gate motor is under 8 years old and the problem is a failed capacitor, blown fuse, or a worn limit switch, the repair is $185 to $425 and the motor probably has another 3 to 5 years in it. Repair is the smart call.
If your motor is over 12 years old and the circuit board has failed, or if you’ve already repaired it twice in the last three years, replacement usually costs less over the next five years. A new LiftMaster or BFT unit also gets you current safety compliance, a 2-year parts warranty from the factory, and better remote range (important if you have a long driveway off Atlantic Avenue or Bellflower Boulevard).
Here’s how we approach it on a service call:
- Diagnose the exact failure point. We identify whether it’s the board, the motor windings, the capacitor, the limit switch, or the gearbox. This takes 30 to 45 minutes on most gates.
- Run the numbers for your specific gate. We calculate repair cost against replacement cost with your gate’s actual dimensions, weight, and usage. You get both numbers in writing.
- Recommend an approach and write the price. You get a written estimate before any work starts. You approve it, or you don’t. No hidden line items appear on the invoice afterward because there aren’t any.
- Complete the work and register your warranty. Every job is covered by the 365-Day Done Right Promise. If the repair isn’t right within a year, the return visit is free. That’s in writing too.
Why Gate Motor Prices Vary More in Long Beach Than Inland
Long Beach occupies a narrow coastal strip between the Los Angeles River and the Pacific. That geography means most homes are within three miles of salt water, and salt water is hard on electronics. We’ve replaced circuit boards in five-year-old Mighty Mule openers near the Peninsula that looked like they’d been left outside in the rain for a decade. The same unit in Los Alamitos or Lakewood might last 8 years.
That means Long Beach pricing tends to include corrosion prevention that inland quotes don’t. When you see a national website saying a gate motor replacement costs $500, that’s a bare unit with no installation, no safety sensor check, and no corrosion protection. It’s not a real number for this city.
Our Gate Motor & Opener service in Long Beach includes the details that matter here: sealed wire connections, dielectric grease on terminals, and enclosures rated for marine environments. It’s the difference between a motor that lasts 5 years and one that lasts 9.
How to Save on Gate Motor & Opener
Saving money on a gate motor doesn’t mean buying the cheapest unit you can find. It means avoiding repeat failures, choosing the right motor for your gate, and not paying for a service call that doesn’t solve the problem.
- Match the motor to the gate. Don’t undersize a motor to save $200. An undersized motor on a heavy gate burns out the gearbox, the capacitor, and eventually the board. You’ll pay for it three times over.
- Protect against corrosion up front. The $60 to $120 in weather sealing and marine enclosures we add on coastal jobs is the best money you’ll spend. It’s cheaper than a circuit board.
- Ask for both numbers. On every service call we provide a written repair cost and a written replacement cost. Sometimes repair is $250 and replacement is $900; sometimes repair is $400 and replacement is $600. You should choose with real numbers in front of you, not a gut feeling.
- Check if your HOA covers the motor. In many Long Beach condo and townhome complexes, the gate operator is common-area property and the HOA is responsible for repair. Before you pay out of pocket, confirm with your property manager.
- Keep the manual remote simple. You don’t need a smart-home gateway for your driveway. A basic two-remote package with a wired keypad typically runs $120 to $180. Smart options (MyQ, BFT U-Link) cost another $150 to $400 and are nice to have, not need to have.
- Get a free estimate. You can call (562) 512-6788 and we’ll walk through pricing for your specific gate over the phone. You’ll know the cost range before we ever roll a truck.
What to Expect When You Call Warden Gate Repair
We’re the gate and opener specialist for Long Beach. Not a general handyman service that sometimes messes with gates. This is all we do. Our technicians are factory-trained on nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When we arrive, the right parts and the right knowledge arrive together.
Before your technician even pulls up to the curb, you’ll know exactly who is coming. You get the technician’s name and photo sent to your phone in advance. At the door, they show a photo ID badge. That’s the Threshold Standard, and it’s enforced on every visit. No anonymous techs in unmarked vans.
We write the price before any work starts. Not an estimate range, a written number. You approve it first, or we don’t proceed. And every job, whether it’s a $195 limit switch or a $2,400 motor replacement, carries the 365-Day Done Right Promise. If the fix doesn’t hold up, we return free within a year. Our founder, Cole Rafferty, has been running gate repair since 2008 as part of the Threshold Group family, and the promise is his idea: if we didn’t get it right, we make it right.
If your gate is stuck open right now, a live person answers the phone 24 hours a day at (562) 512-6788. Not a voicemail. Not a chatbot. You’ll talk to someone who can actually help.
FAQs – Gate Motor & Opener Cost
How much does it cost to replace a gate motor in Long Beach?
A residential gate motor replacement in Long Beach typically costs $850 to $2,400 including installation, depending on whether you have a swing or sliding gate. Swing gate motor replacement starts around $650, while sliding gate motor replacement starts around $1,200 because of the heavier-duty hardware involved. Call (562) 512-6788 for an exact number on your specific gate, free.
Is it cheaper to repair or replace a gate opener?
If the motor is under 8 years old and the failure is a capacitor, fuse, or limit switch, repair is cheaper, typically $185 to $425. If the unit is over 12 years old or the circuit board has failed, replacement often costs less over five years because a new motor comes with a factory warranty and updated safety features.
How much does a circuit board replacement cost for a gate opener?
Circuit board replacement in Long Beach runs $250 to $550 depending on brand. DoorKing and Viking boards are at the higher end; Mighty Mule and Linear boards are lower. Coastal corrosion on board connections is the most common failure we see in Long Beach.
Can you replace my gate motor the same day?
In most cases, yes. We stock common motors and boards for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and our technicians carry parts on the truck for the most common Long Beach gate failures. If your specific motor isn’t on the truck, it’s typically one to two business days to source. Call (562) 512-6788 and we’ll tell you exactly when we can be there.
How long does a gate motor last in Long Beach?
A quality gate motor in Long Beach lasts 7 to 12 years when installed with corrosion protection. Without it, coastal salt air can cut that to 4 to 6 years, especially within two miles of the water. We apply marine-rated enclosures and sealed connections on every coastal job for exactly that reason.
Do you charge for estimates?
No. Estimates are always free. Call (562) 512-6788 and we’ll give you a price range over the phone, then confirm it with a written quote before any work begins.
What brands of gate motors do you service?
We service and install LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians are factory-trained on all nine brands, so the parts and the know-how arrive together.
Ready to get your gate working again? Call (562) 512-6788 for a free estimate. A live person answers around the clock, and you’ll know the price before anyone starts turning a wrench.
Written by Cole Rafferty, Owner at Warden Gate Repair Long Beach, serving Long Beach, CA since 2008.
Pricing reflects the Long Beach market as of 2026. Warden Gate Repair Long Beach offers free estimates – call (562) 512-6788.
What Our Customers Say
"The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Properly aligned the photo eyes and tested the auto reverse. Left a note of what he changed."
- Isaac N."Keypad at the entrance died. They replaced it and reset all the codes for the neighbors. Took about an hour."
- Gilbert S.